Discussion in "General help Guidance and Discussion" started by    prajwalsnh    Apr 30, 2013.
Tue Apr 30 2013, 05:39 PM
#1
HI frenz,

Iv completed my final year project. Though i have finished it successfully there are some

questions for which i don have an answer. I need help from people who r willing to

make me understand.

My first question is the transistor shown in below circuit to control relay

is working as an amplifier. am i right?? If so its in common emitter mode. why do they

connect 1k resistor in series with base?? Y only 1k why not other value??


[ Edited Tue Apr 30 2013, 05:41 PM ]
Tue Apr 30 2013, 05:42 PM
#2
sorry the circuit is this not the one shown above
Wed May 01 2013, 05:33 AM
#3
Transistor is not used as amplifier but as a switch. We operate transistor in saturated (on state) and cut-off (off state) mode only.

And why 10K or 1K it actually depends on type of transistor used and collector current you want. Following are the exact parameters that defines your resistor value:

1. hfe/gain
2. Collector current
3. Drive voltage (voltage at pin)
4. Max drive current controller Pin can provide.

resistance value = V - 0.7 / C / hfe
where V is Supply voltage at pin (~5v)
C is collector current you want
hfe is gain of transistor (see datasheet for this value)
Tags Transistor Base Resistor CalculatorTransistor as Switchbase resistor for transistor switch
Thu May 02 2013, 05:44 AM
#4
@Ajay Bhargav

I saw the datasheet of BC547B. I have used that transistor in my ckt... In data sheet its given as dc current gain as 100mA. If i substitute that value then i will get the answer as 43 which means 43 ohms... i guess im wrong in my calculation.
Sat May 04 2013, 05:09 AM
#5
well gain is never in mA as gain is a ratio of current. Pleas make sure you have seen the right value. It should be mentioned with hfe. If you have a multimeter you can place your transistor in DMM and test its hfe.

Get Social

Information

Powered by e107 Forum System

Conversation

Sun Sep 27 2020, 04:55 PM
Aleida
side effects levitra vs cialis http://cialistores.com - buy cialis online cheap cialis commercial models does generic cialis work forum canadian cialis buy cialis nz
Sun Sep 27 2020, 03:36 PM
Waldo Avalos
MORE INFO=> https://bit.ly/2ZsKQsz
Sun Sep 27 2020, 08:38 AM
Bryanslj
only
Sun Sep 27 2020, 07:06 AM
Edgar Sharrow
Want no charge advertising for your website? Check out: http://bit.ly/post-free-ads-here
Sat Sep 26 2020, 07:27 PM
Ronald Withrow
This software will help to increase traffic to website to hundreds, thousands times.
Thu Jun 11 2020, 06:27 AM
anudee
sir could please send the code for I2C and wifi interfacing with 8051
scena
Tue May 19 2020, 10:29 PM
Does anyone have microcontroller programming software for STC15F104W (core 8051, 4 k, 128 byte, 6 I/O pin, UART ... DIL8), that works?
Sat May 02 2020, 07:38 PM
Tamu Gurung
Hi I am looking for a assembly language program for a digital decimal counter. Time counts max limit of 2 mins starting from 2.00 mins and ending at 0.00. time is to be displayed on 4 7-segment LED displays. Edsim51 simulator to be used. Thanks
Wed Mar 25 2020, 01:39 PM
Tajammul
Sir kindly send the code file i2c for 8051
ExperimenterUK
Fri Mar 13 2020, 10:36 PM
@ Rohitnani,ABEBE..which project ?

Downloads

Comments

Mirza123
Thu Jun 25 2020, 03:46 PM
eunicelove124
Mon Jun 22 2020, 03:03 PM
cerouno
Tue Jun 16 2020, 05:10 PM
Marce
Sat Jun 13 2020, 09:43 PM
Davidthils
Thu May 21 2020, 12:44 PM
Jakeror
Thu May 21 2020, 01:28 AM
motorCar
Wed May 20 2020, 07:05 PM
Vordrync
Wed May 20 2020, 11:52 AM

Online

Guests: 87, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38215
Newest member: Mirza123