Discussion in "Embedded GSM Development" started by    Engr    Jan 9, 2009.
Fri Jan 09 2009, 03:25 pm
#1
hi
I m gona start ma new project on GSM vehical security system using 8051 or PIC uC. The security system is based on Cell info Display reterived from the respective GSM network (As in Pakistan Telenor offers such facilty that it shows the location of the respective place or the transmiter of which it is connnected. ) so plz guide me how to get the cell info and which cell phone to use and how to send back the collected data to a predefined number..

Note: please i want an urgent response of the experts using this great community..
Fri Jan 09 2009, 08:53 pm
#2
u may use GPS. bcz ur gsm network provider may not allow..
Sat Jan 10 2009, 01:50 am
#3
what kind of GSM modem are you going to use?
the info you will get using AT Commands. Controller will supply AT Command to know cell broadcast information of that cell site. You can use that information in your project. Most important is GSM modem you are going to use.
Sat Jan 10 2009, 02:01 am
#4
well bro suggest me a gsm modem.. or better if u ill suggest me any mobile phone bcz it wiil be easy for me to get it localy..and also let me know tha AT Commands to fetch the cell info. i need ur full support bro...
wel i ill be wating for ur reply
Sat Jan 10 2009, 03:06 am
#5
getting a right phone is most important. see if you can get sony erricsson T610. it supports AT Commands.

I saw a duplicate topic of yours, Its better if you stick with this topic. I am moving this topic and going to lock the other one.

[Topic moved to Embedded GSM Development]
Sat Jan 10 2009, 10:12 am
#6
ok sorry bro for this

yup i can get SE T610 but what will be the at command to get the cell info ? i just want those commands! or is there any other method for retriving the cell info.
Tue Jan 13 2009, 04:06 am
#7
Those commands are more than enough. You can search for AT Command manual for sony erricsson. Basic commands are universal and are same for every phone or gsm modem.

try downloading from here
http://developer.sonyericsson.com/getDocument.do?docId=65054
Tue Jan 13 2009, 10:35 am
#8
u can also visit the following site. it gives the details of the AT commands alongwith the commands to change the baud rate of the GSM module.

http://www.bluocean.biz/technicalinfo.html

regards,
shweta1

Get Social

Information

Powered by e107 Forum System

Downloads

Comments

ChrisLub
Tue Apr 23 2024, 05:21 pm
Davidbab
Tue Apr 23 2024, 10:41 am
Richardrit
Tue Apr 23 2024, 09:54 am
HenryLaf
Mon Apr 22 2024, 03:50 pm
bleradrar
Mon Apr 22 2024, 06:38 am
ppu-pro_ka
Sun Apr 21 2024, 07:39 pm
Infewow
Sun Apr 21 2024, 06:30 pm
HumanTak
Sun Apr 21 2024, 12:26 pm