Discussion in "Project Doubts" started by    koushal    Apr 29, 2007.
Sun Apr 29 2007, 04:37 AM
#1
i have some doubt in internet automation .....
i have finished the hard ware ...
i even got the out put once ,
now i am not getting he op
the lcd just displays read msges
......... what ever i send in the client comp
the msges will be displayed on the server,
sometime i get the msg as ok in the client comp....
i have checked the hard ware, seriall comm is working,
lcd is working ....
as i told , i got the op twice ,
i have even changed the port address....

plz do help !
Tags internet automationhome automationseriallport addressinternet problem
Sun Apr 29 2007, 08:30 AM
#2
commands are working? other than msg?
Sun Apr 29 2007, 05:16 PM
#3
thanks for u r reply sir!!!
now its working !
thank god !

there was some hard ware problem , which i couldnt make out the mistake till now !
i have checked each part of the hardware , ie serial comm is working , lcd is working ...... still i couldnt find out the mistake


i had done home automation ( with didgital clock) i made use of that hard ware , the project is working now
can u plz send me the updated home automation using internet !

i had downloaded frm the download section ... but its the same ckt,
just post the updated version


thanking you
( koushal.v.v )


[ Edited Sun Apr 29 2007, 05:16 PM ]
Tags home automationserial commreplycktfrm
Sun Apr 29 2007, 07:35 PM
#4
No the circuit is updated... please check again.. i added few things u can easily make out that circuit is updated.

what you did with the HA project? i mean what is the RTC work in that. Please explain.
Tags rtcplease explain
Wed May 02 2007, 05:26 PM
#5


No the circuit is updated... please check again.. i added few things u can easily make out that circuit is updated.

what you did with the HA project? i mean what is the RTC work in that. Please explain.

Rickey


what i did was ,
i had a plan of switching on a particular device at one particular time ,
i had connected 5 devices ( electrical appliances )
so when the alarm time comes the device must switch on ...
so i was using RTC there .....

koushal.v.v
Wed May 02 2007, 05:37 PM
#6



No the circuit is updated... please check again.. i added few things u can easily make out that circuit is updated.

what you did with the HA project? i mean what is the RTC work in that. Please explain.

Rickey


what i did was ,
i had a plan of switching on a particular device at one particular time ,
i had connected 5 devices ( electrical appliances )
so when the alarm time comes the device must switch on ...
so i was using RTC there .....

koushal.v.v

koushal.v.v


i didnt see that LED sorry the ckt is updated ....
i will upgrade my hardware ....


thanking u
( koushal.v.v )
Sun May 06 2007, 06:54 AM
#7
good.. and tell me about your progress!
Sun May 06 2007, 02:08 PM
#8


good.. and tell me about your progress!

Rickey


i have shown the demo of HA tru internet in my coll so i will build the updated HA after few days , because i have my xams now ....i will surely complete the project MR.Rickey ( the one ) !

thaking u
( koushal.v.v )

Get Social

Information

Powered by e107 Forum System

Conversation

Thu Jun 11 2020, 06:27 AM
anudee
sir could please send the code for I2C and wifi interfacing with 8051
scena
Tue May 19 2020, 10:29 PM
Does anyone have microcontroller programming software for STC15F104W (core 8051, 4 k, 128 byte, 6 I/O pin, UART ... DIL8), that works?
Sat May 02 2020, 07:38 PM
Tamu Gurung
Hi I am looking for a assembly language program for a digital decimal counter. Time counts max limit of 2 mins starting from 2.00 mins and ending at 0.00. time is to be displayed on 4 7-segment LED displays. Edsim51 simulator to be used. Thanks
Wed Mar 25 2020, 01:39 PM
Tajammul
Sir kindly send the code file i2c for 8051
ExperimenterUK
Fri Mar 13 2020, 10:36 PM
@ Rohitnani,ABEBE..which project ?

Downloads

Comments

Mirza123
Thu Jun 25 2020, 03:46 PM
eunicelove124
Mon Jun 22 2020, 03:03 PM
cerouno
Tue Jun 16 2020, 05:10 PM
Marce
Sat Jun 13 2020, 09:43 PM
Davidthils
Thu May 21 2020, 12:44 PM
Jakeror
Thu May 21 2020, 01:28 AM
motorCar
Wed May 20 2020, 07:05 PM
Vordrync
Wed May 20 2020, 11:52 AM

Online

Guests: 106, Members: 0 ...

most ever online: 182184
(Members: , Guests: 182184) on 06 Aug 2010: 05:37 AM

Members: 38215
Newest member: Mirza123